Convergence Communications

Expand your Modular ICS (MICS) systems line capacity by using a Norstar 12x0 Fiber Trunk Module, or use a Norstar 0x16 Fiber Station Module to add 16 extensions / stations for additional phones. We offer 4 Line Trunk Cards (LS/DS), CallerID Trunk Cards (CI), Direct Inward Dialing (DID), T1 Digital Trunk Interface (DTI)(T1), Primary Rate Interface (PRI), E&M DISA, Remote Access Device (RAD), Analog Terminal Adapter(ATA), 008 ASM (ASM), T1 Clocking Cards, Fiber Combo Cards, along with many other line/station/T1 configuration options. Use the 2 Port Fiber Expansion Cartridges, 6 Port Fiber Expansion Cartridges, or the 6 Port Fiber Combo Cartridge to interface you expansion modules.

Nortel Norstar 12x0 Fiber Trunk Module (NTBB20)

Features:

• Allows the addition of up to three trunk cards to a Nortel Norstar Modular ICS Phone System.
• Increases line capacity by up to 12 lines.
• Trunk cards required for line increase.
• Holds up to 3 Trunk Cards; Caller Id (CLID) or Non Caller Id (LS/DS)
• Fiber Cable included.
• 2 Port or 6 Port fiber expansion card required.
• Compatible with all versions of the Nortel Norstar Modular ICS system.
• $120.00/ea.

NORTEL NORSTAR FIBER STATION MODULE (0X16) NT5B41

Features:

• Increases extension / station  capacity by 16 extensions.
• Fiber Cable included.
• 2 Port or 6 Port fiber expansion card required.
• Designed for use with the Modular ICS, the Fiber Station Module adds additional station ports to the system
• These units are connected to the Modular ICS by a fiber cable.
• Your MICS KSU unit will require either a 2 or 6-port slim fiber card to accept the fiber cable.
• $150.00/ea.

The NT7B75 NORTEL NORSTAR GLOBAL ANALOG TRUNK CARTRIDGE

Features:

• 4x0 Loop Start/Disconnect Supervision trunk cartridge supports disconnect supervision, and provides access for up to 4 analog central office lines.
• This trunk cartridge is compatible with the, Modular ICS,  Compact ICS, the Modular 8X24. It may be inserted into the Compact ICS core trunk slots, the Modular ICS core trunk slots, the Copper Trunk Module or the Fiber Trunk Module.
• $50.00/ea.

Nortel Norstar CLID - Caller Id Trunk Cartridge (NT5B41, NT7B75)

Features:

• Loop Start, analog trunk cartridge with the capability to detect and translate incoming CMS/CLASS information from the central office for display and use on Norstar station sets.
• Supports disconnect supervision, and provides access for up to 4 central office lines.
• This trunk cartridge is compatible with the Modular ICS ,Compact ICS, and Modular 8x24 (Release DR5 or higher). It may be inserted into the Compact ICS core trunk slots, the Modular ICS core trunk slots, the Copper Trunk Module or the Fiber Trunk Module.
• $245.00/ea.

NORTEL NORSTAR T1 DIGITAL TRUNK INTERFACE (DTI) NT7B74

Features:

• Cartridge provides access for up to 24 digital T1 or ISDN-PRI channels.
• Supports fractional T1
• The core Modular ICS Can support up to two DTI's for a total of forty-eight T1 or ISDN-PRI digital lines. 
• RJ48 jack provides the interface to the T1 network.
• Channels can be configured to emulate either Loop-Start, E&M, or DID Trunks.
• Integrated Channel Services Unit (CSU) which provides line isolation, signal regeneration, and network performance monitoring.  Can be turned off for use with an external CSU.
• Clocking Services Cartridge Required. (Services Cartridge or 6 Port Fiber Combo Card)
• For use on the Modular ICS (MICS) only.
• Enable Primary Rate Interface (PRI) by using the PRI Enabler Soft Key.
• $350.00/ea.

NORTEL MICS T1 Services Cartridge NTBB24GA-93

Features:

• Required to synchronize the DTI to the T1 network clock or act as a master clock source, providing the clock signal for network of systems. This card is required if using DTI Cartridges or ISDN-BRI interface cartridges.
• The Services Cartridge also provides DTMF tone recognition for T1 circuits.
• One Services Cartridge will support two DTI cartridges.
• Provides the clocking service required for digital networks.
• This card is required if using DTI Cartridges or ISDN-BRI interface cartridges.
• Supports all clocking that is needed on the MICS regardless of the quantity or mixture of DTI's or ISDN-BRI cartridges.
• This card cannot be used if your system has a copper expansion cartridge installed.
• Compatible with the Norstar Modular ICS (MICS) only.
• $150.00/ea.

Nortel Norstar 2 Port Fiber Expansion Cartridge (NTBB02)

Features:

• Used to add 2 extra connections to the Modular ICS Cabinet.
• Provides connection for up to 2 fiber turnk modules or 2 fiber station modules. 
• Available in a 6 port expansion
• $110.00/ea.

Nortel Norstar 6 Port Fiber Expansion Cartridge (NTBB06)

Features:

• Used to add 6 extra connections to the Modular ICS Cabinet.
• Provides connection for up to 6 fiber turnk modules or fiber station modules.
• $150.00/ea.

Nortel Norstar 6 Port Combo Cartridge (NTBB25)

Features:

• Is both a Service Card (T-1 Clock Controller) and a 6 Port Expansion card.
• It allows you to connect up to six expansion modules and a T-1 card to your Norstar Modular ICS Cabinet.
• Provides The Clock Controlling for the T1.
• Supports up to 3 T1 DTI Cards.
• $325.00/ea.

Nortel Norstar FAST RAD - Remote Access Device (NT8B80AA)

Features:

• Provides remote access for maintenance and programming to norstar systems
• Requires one unused station port
• Can provide auto answer capabilities
• Norstar Manager software required for remote programming
• The Fast Remote Access Device (FastRAD) is an integral part of local and remote administration and maintenance capabilities of Nortel Norstar telephone systems.
• PC applications such as Norstar Remote Utilities Software use a modem to call and connect to the FastRAD II at the Nortel Norstar system.
• The FastRAD II modem will support baud rates from 4800 - 14,400 for external connections and 300 - 19,200 for local or direct connections.
• The FastRAD II is connected to the Nortel Norstar system using a TCM port, and answers a call on the Norstar system trunk line using its built-in modem.
• $140.00/ea.

Nortel Norstar RAD - Remote Access Device (NT8B80)

Features:

• Provides remote access for maintenance and programming to norstar systems
• Requires one unused station port
• Can provide auto answer capabilities
• Norstar Manager software required for remote programming
• Not compatible with remote set or remote tools software
• $95.00/ea.

Norstar PRI Authorization Code (NTAB2769)

Features:

• Required to configure the Digital Trunk Cartridge (DTI Card) as a PRI Card.
• $395.00/ea.

Features:

• Increased data transfer speeds of up to 28.8 kb/s.
• Connection of analog phones, fax, voice, etc. to a digital Norstar System
• $110.00/ea.

Nortel Norstar DS30 - Station Port Adapter (NTAB2261)

Features:

• The Norstar DS30 Station Port Adapter converts up to 8 Station ports to a single DS-30 fiber optic line.
• Connects a Norstar Applications Module (NAM) equipped with a Media Services Base Interface Card (MS-BIC) to a Norstar Compact-ICS,  Norstar 8x24,  Norstar 6x16, and Norstar 3x8 Phone Systems.
• The adapter can be located up to 1500 feet / 450 meters away from the above Norstar systems, allowing the Applications Module to be located remotely within an office. Up to 8 Norstar Station lines and 16 voice channels are supported with two RJ-45 cables, included with the adapter.
• Power Supply include
• $225.00/ea.

---

Nortel Norstar 008 ASM Analog Station Module w/ MW (NTBB51)

Features:

• Supports Telephone Message Waiting Indicator.
• Provides 8 Analog Stations / Extensions.
• 2 ASM 008 units can be connected to a norstar system to provide 16 Analog Lines. 
• Fiber expansion cartridge is required for connection.
• Fiber cable included.
• Used to connect:  Single Line Analog Telephone Sets, Fax Machine, &  Modem
• $395.00/ea.

---

MICS NVRAM- Nortel Norstar Modular ICS NVRAM (NTBB08)

Features:

• Cartridge Only
• $180.00/ea.